Solar Pool Rings use the sun's free energy to increase your pool or spa temperature by and average of 1/2 degree per day. The clear top side attracts the sunlight and the blue underside transfers the heat into the pool or spa. This unique new product is easy to put on and easy to take off. And there's no need for a solar reel with its unique design. Solar Sun Rings Magnet spaced along the outer perimeter attach the Solar Pool Rings together. This is much safer than standard solar covers as the magnets easily come apart if someone falls into the pool.
Automatic pool cleaners remain unhampered and work beneath the Solar Sun Rings, so there is no need to remove them while cleaning. Each ring is five-feet in diameter. Buy one for a spa or several for a pool. It is recommended to cover approximately 70% of the pool with Solar Sun Rings for maximum effect (some direct sunlight to your water is helpful to prevent algae growth). Made of UV-Resistant poly vinyl. Ideal for swimming pools and spas and hot tubs. Three-year limited manufacturer's warranty.
What Are Solar Sun Rings?
The Solar Pool Ring is a passive solar swimming pool heating device made from two sheets of heavy weight U.V. resistant vinyl. The upper clear layer holds insulating air and focuses sunlight on the blue colored lower layer. The blue layer absorbs about 50% of the sunlight and converts it to heat. The balance of the sunlight is allowed to pass through for deep water heating.
How Do Solar Sun Rings Work?
At night the contained air acts as an insulating blanket to retain heat gained during daylight.
Solar Pool Rings are equipped with six magnets to improve clarity and decrease hardness of the water in your pool. The magnets are positioned to facilitate rafting. The strength of the magnets will permit single position removal but will easily separate to prevent entrapment in accidental falls.
Solar Pool Rings were designed to be compatible with automatic pool cleaners. In the event the suction hose catches on a ring, the ring will separate from the raft to allow the pool cleaner to continue.
Neither water nor pool chemicals can evaporate through the Solar Sun Rings two layers of heavy weight vinyl. You will save water and chemicals about equal to the percentage of the surface of your pool covered.
Once the water in your pool has reached adequate temperature, Solar Sun Rings may be turned over to conserve water by limiting evaporation without significantly heating the water.
How Many Solar Sun Rings Do I Need?
We recommend enough Solar Sun Rings be purchased to cover 70% to 80% of your pools surface, ignoring the small triangles between the rings.
Are Solar Sun Rings Compatible With My Pool?
Solar Sun Rings may be used on all chlorine or salt water system pools, whether in ground or above ground.
How Do I Clean My Solar Sun Rings?
After removal from the swimming pool Solar Sun Rings can be easily cleaned with a sponge and mild detergent solution.
Solar Sun Rings Help Your Pool Stay Clean
Your pool requires some direct sunlight and open water to stay healthy.
The open water around the raft of Solar Sun Rings and the triangle caused by the convergence of three Solar Sun Rings is by design. These open areas allow your pool to receive some direct sunlight. This sunlight will greatly reduce the incidence of mustard algae.
